Tag Archives: CATIA V5

How to use Search Browser & Old Versions|AUTODESK Inventor Tips

Recently we posted “How to Configure Default Templates and Mini-Toolbars OFF by Default |AUTODESK Inventor Tips” and now we are sharing two new tips from our “120 Autodesk Inventor Tips” vault.

Our Autodesk Subject Matter Expert from i GET IT Learning created these 120 short tech tips to present at Autodesk University. Read more…

Read more

How to Edit Elements Offset from Edges | CATIA V5

In this Tech Tip, you will learn to use the Offset Definition function to edit the definition of elements and offset them from geometry to make them external to the sketch.

Some key points to take away from this Tech Tip are:
– This function only works on sketch elements that are offset from the part, not elements in the active sketch.
– When editing the offset, you may need to exit and re-enter the sketch to update the offset.
Know More…

Read more

How to reflect sketch dimensions with tolerance in Drafting workbench in Catia V5

Do you use the drafting workbench in CATIA V5? This tech tip from the Tata Technologies I GET IT Team will demonstrate how to show the sketch dimensions and tolerances using Generative Drafting (i.e…Front View). Follow through the steps below to try it for yourself! Step 1 Draw any sketch with dimension having tolerances on any of the plane (XY

Read more

Mega Catia and Super Mega Catia! Introducing CATMEE and CATMSE

This is an exciting post for me! Dassault has just come out with a couple of new bundles that blow the doors off anything I have seen previously. CATMEE – Mechanical Engineering Excellence The first package is named CATMEE; this would be the “Mechanical” version of the package. In Classic terms, previously for this purpose I would have recommended an MD2 trigram. 

Read more
« Older Entries