Know the Difference between Fix and Default constraints in CREO Parametric Assembly Design

Posted on by Leave a comment

A constraint in computer-aided design (CAD) software is a limitation or restriction imposed by a designer or an engineer upon geometric properties of an entity of a design model that maintains its structure as the model is manipulated.

In this Tech Tip, we will explain about the difference between ‘Fix’ and ‘Default’ type constraints in Assembly Design using Creo Parametric. Apparently these two types of constraints look similar as they both make the model fully constrained, but we will see two examples wherein we can understand the distinct difference between these two constraints.

Read more

How to Define Connection Elements for Weldments and Structural Systems | SOLIDWORKS

Posted on by Leave a comment

Recently we posted “How To Create Miter Joint Trim for Weldments in SOLIDWORKS” in which we know that Welded Joints aka “Weldments” is one of the process used to assemble the components/parts. In this blog you will know how to define Connection Elements for weldments and structural systems in SOLIDWORKS, and then insert them into a structural part.

Read more

How to Shift Trim/Extend & Offset Work Plane on Sketch Creation | AUTODESK INVENTOR TIPS

Posted on by Leave a comment

Recently we posted ‘‘Autodesk Inventor Tips: Restart, Line Command and Inferred Trim” and now we are sharing two new tips from our “120 Autodesk Inventor Tips” vault.

Our Autodesk Subject Matter Expert from i GET IT Learning created these 120 short tech tips to present at Autodesk University. Now we have shared the first eight tips in PLM Tech Talk. To get access to all tips go to – SkillAdvisor from i GET IT (myigetit.com) and choose your role and interested software relevant to you and subscribe and gain access to many other courses.

Follow below videos and steps to get to know more

Read more

How to Enable New Sketch | Siemens NX

Posted on by Leave a comment

The New Sketch refers to a New Sketch Environment with a New UI and Solver. The New Solver comes with New Methodologies and Techniques to fully define sketches which can be very different to classic sketches. The classic sketch is still available but remains a separate environment. While two different environments exist, only one can be enabled at a time per NX session. The New Sketch is enabled using the out of the box defaults unless overridden by a user or a company admin.

Read more
Uncategorized

System of Systems Architecture

Posted on by Leave a comment

Good architecture in today’s world of complex programs goes a long way in determining how easy it will be to implement different functionalities and to resolve changes if any in the future. This framework becomes even more pertinent for multi-layered systems. A system of systems in layman’s terms is a cluster of similar systems that fuse their competencies and resources to

Read more

How to create BOM Table and Balloons in Creo Parametric Drawing

Posted on by Leave a comment

Bill of Material a.k.a ‘BOM’ is a comprehensive list of raw materials, components, assemblies, sub-assemblies, parts, or anything which is required to manufacture the finished product.
In this Tech Tip, we will show you how to create BOM Table and Balloons in Creo Parametric Drawing. You will also know ‘Recursive’ type BOM Table.

Read more
« Older Entries