In this Tech Tip, you will learn to use the Offset Definition function to edit the definition of elements and offset them from geometry to make them external to the sketch.
Some key points to take away from this Tech Tip are:
- This function only works on sketch elements that are offset from the part, not elements in the active sketch.
- When editing the offset, you may need to exit and re-enter the sketch to update the offset.
Follow steps to know how to edit elements offset from edges.
Step 1
In the Graphics Window, double-click the offset to edit. The Offset Definition dialog displays.
Step 2
In the Parallel Corner Type list, select the appropriate option
Step 3
In the Parameters area, select the desired offset parameters.
Step 4
In the Propagation area, select the required type
Step 6
Click OK to modify the offset.
About i GET IT
i GET IT is our Tata Technologies eLearning solution designed to teach engineers how to be better in using today’s leading MCAD (Mechanical Computer Aided Design) applications and design skills.
For more tech tips and in-depth eLearning for CATIA V5, including this and new courses on other design solutions, please visit https://www.myigetit.com. You can sign up and get FREE Subscription when joining through SkillAdvisor to get our informative Newsletter.
Start your upskilling journey!
If you should have any questions, please reach out to iproducts@tatatechnologies.com or igetitsocial@tatatechnologies.com for help.